Payment & Shipping Terms:
|Skilled Welder:||Automatic Welding||Material:||Stainless Steel 304, Carbon Steel|
|Effective Volume Of The Tank:||5m3,10m3,customized||Panel Size:||1x1m,1x0.5m,0.5x0.5m|
|Application:||Water Storage, Wine, Fruit Juice，Liquid||Use Life:||At Least 10 Years|
multi bag filter housing,
stainless steel bag filter housing
Customer'demand Hot 50000 Liter Stainless Steel 304/316 Price Hot Water Storage Tank For Boiler
The hot water storage tank characteristics
The hot water storage tank is used to store the hot water prepared by the system and is supplied to the user.
Therefore, it is necessary to ensure cleanliness, not easy to breed bacteria, and good heat preservation performance.
1, pure stainless steel insulated water tank, with stable physical and chemical properties, no pollution to water quality to ensure cleanliness;
2, high strength, light weight, beautiful appearance;
3, the surface is smooth and beautiful and easy to clean;
4, excellent corrosion resistance, good sealing; strong impact resistance, good seismic performance, etc.
Therefore, it is widely used in solar air energy system engineering.
Below, Guangzhou CHUNKE company shares the precautions for the installation of stainless steel insulated water tanks for users to help you better use stainless steel insulated water tanks -
|1||insulated water tank can be installed on the flat roof, the ground or the householdThe series, and can also be installed on the outdoor balcony, indoor kitchen, bathroom and other locations.|
The installation position of the insulated water tank should be convenient for draining the sewage outlet. The hot water tank should be as close as possible to the water point and the installation position of the main machine to reduce the heat loss of the pipeline.
|3||loor project, the water tank more than 5 tons requires the customer to bear the weight basis, the load-bearing foundation bearing capacity should be greater than twice the weight of the water tank after the water; the floor is relatively wide or the water tank is relatively large, it is recommended that the customer divide the water tank into multiple On the load-bearing beam (normally, the single round water tank should not exceed 10 tons)|
|4||The installation of the insulated water tank should be done at a level of 150mm or more. The location of the water tank should not affect the surrounding residents.|
|5||The foundation of the insulation tank needs the water level, and the foundation plane cannot be filled with water; if the bracket welded by the I-beam or channel steel, the position of the tank must be laid flat with the steel plate. The circular insulated water tank should be placed upright and should not be placed horizontally.|
|6||The installation and maintenance space should be more than 600mm around the water tank|
Because the circulating water pump configured by the unit does not have a suction stroke, the installation position of the water tank should not be lower than the unit. Considering that the head is limited, it should not be higher than the unit. The conditions are best placed at the same level.
Water tank detail share.
Quick-open boom flange design for easy cleaning and inspection of internal conditions
Customized inlet and outlet caliber, flexible modification of drawings
Contact Person: Cara Leong