30000L UF System Water Treatment Plant UltraFiltration Membrane filtration unit Water Purifier For microporous membrane

UF water treatment plant 30000LPH Ultra-Filtration Membrane Water Purifier System For Fish Farm

Hollow fiber ultrafiltration (UF) water purification system Water production ≥ 30m3 / h, recovery rate: 75-85%

Features

♦Polyethersulfone material, higher mechanical strength, excellent performance for chemical tolerance.

♦Single inner layer sponge-type structure, higher permeate flux, better interception performance

♦Permanent hydrophilicity, lower deep fouling, steady flux, easier recovery after cleaning

♦Thicker membrane separation layer, better antifouling performance, higher mechanical strength

How to choose the machine are suitable for you?

Pls let us know:

1,what's your capacity?

2,what's your inlet water and request for output water.

3,Do you have specification requestment for brand and material?

Ultrafiltration principle

Ultrafiltration is a thin film separation technology, rely on the fluid flow and pressure drive to cut the filtering process, and the molecular weight size to separate particles to pressure difference for driving force, raw material liquid in the membrane surface flow, raw materials of solvents and small fluid solute particles from high pressure liquid materials of low voltage side of the membrane through, soluble materials and small aperture than film material will can be used as a liquid membrane through through, the liquid through generally called filter out liquid or through liquid, not through the membrane material will be ultrafiltration membrane that capture, generally called the interception of concentrate, concentrate in filtering liquid concentration increases in the left, to the purification of the solution, separation and enrichment purpose.

Function introduction

Ultrafiltration is a membrane separation equipment. But than microporous membrane much smaller, belong to molecular level, it can filter out bacteria, viruses, colloid and small molecular weight that particles. It used in ordinary temperature, filter reliable performance, high precision, and does not need to add medicine that can reach the separation, purification and concentration of levels of purpose. It has simple structure, easy to operate, cover an area of an area small, easy to expansion and increase components, etc.

Technical characteristics

Ultrafiltration technology can be separation and purification, and the solution of concentrated goal, is a highly efficient, environmental protection, energy saving the separation process;

With a low pressure as a driving force, to realize the molecular size according to separate particles, such as water the preparation of mineral water, industrial water recycling recycle;

Ultrafiltration separation process in the temperature of the room temperature is near, low energy consumption, no phase change, in food processing, pharmaceutical industry, biological technology and other fields have a unique application value;

The scale of the ultrafiltration process and processing power to adapt to the wide, equipment structure compact, easy to other separation unit integration, and realize the automatic control. As OF + RO membrane method has become a desalination water treatment is recognized as one OF the best combination.

Application field

Oilfield water flooding back to fine processing

Food, drink water processing

Cities, towns and rural water supply processing

Processing surface water and well water for drinking

Depth of wastewater recycling

The white wine turbidity removal, ratafia, wine, rice wine of aseptic, turbidity removal

Food, the enrichment of dairy processing

The pretreatment of the reverse osmosis

Installation / Commissioning / Training for Ultra-Filtration system

1. The seller is responsible for installation, commissioning and personnel training. The buyer is required to provide travel, visa and accommodation and other expenses, pay the staff salary;

2. The buyer may arrange for personnel to be trained at the seller, and the seller shall provide accommodation and pick-up and drop-off services;

3. It is estimated that the installation time is 5 day, the commissioning time is 2 day, the training time is 1 day, and the technician is 1 day;

4. The training content includes, the structural principle of the product, the shutdown and operation of the equipment, and the maintenance of the equipment and maintenance knowledge;

5. The seller provides the operating instructions and related technical information of the product;

6. Individuals are appropriately adjusted according to different projects, installation, commissioning and training. 

Detail picture for UF System:

Engineer are in production

PLC box for UF System:

PLC inside: