9T Stainless Steel Water Purification Machine For Industrial Reverse Osmosis Plant

9T RO Water Treatment System for Industrial Stainless Steel Reverse Osmosis Plant​

 Product  Advantage

1, PLC automatic control, no need for human guards, saving labor costs

2,EDI high purity water equipment can continuously produce ultra-pure water that meets the requirements of users, and will not stop because of regeneration.

3,Equipment with high water quality, stable water, low energy consumption, high water utilization, low operating costs and maintenance costs.

4,The membrane protection system can automatically flush the membrane surface pollutants when shutting down, prolonging the service life of the membrane.

5,Compact structure, small footprint, greatly saving the infrastructure investment.

Parameter Table

 APPLICATION

 Reverse osmosis is applied to the preparation of pure water and ultra-pure water in the industries of electronics, medical treatment, food, boiler make-up water and so on. Preparation of space water, distilled water and purification of beer and beverage water. Pre-desalination of high-pressure boiler make-up water. Desalination of seawater and brackish water. Pharmaceutical, textile, chemical, food and other industries for separation, concentration, liquid decolorization for the purpose of the process. Recovery and application of useful substances to aqueous solutions in industrial production. Other separation processes for the purpose of separating bacteria, heat sources, colloidal particles and organic matter.

Description

Industrial reverse osmosis equipment is mainly used for industrial production of pure water production, according to customer demand for the use of different processes to produce pure water in line with customer production standards, water conductivity up to 0.055μS/cm ~ 10μS/cm.
Product parameters of edi water purification equipment
Feed water: RO pure water, the general conductivity of water is 4-30us/cm.
PH:5.0-8.0(under this PH condition, the water hardness can not be too high)
Temperature: 5-35°C
Inlet pressure: Maximum 4kg/cm2(60psi) Minimum 1.5kg/cm2(25psi)

Inlet water conditions
Reverse osmosis RO produced water, conductivity 1-20μs/cm, maximum allowable conductivity ≤ 30μs/cm (NaCl)
pH value: 7.5-9
Temperature: 15℃ - 35℃
Inlet pressure (DIN): 0.15-0.4MPa
Concentrated water inlet pressure: 0.10-0.3MPa
Produced water pressure (DOUT): 0.05-0.25MPa
Concentrated water outlet pressure (COUT): 0.02-0.2MPa
Incoming water hardness: <1.0ppm (in terms of CaCO) (recommended 0 5ppm or less)
Inlet water organic matter: TOC <0.5ppm
Inlet water oxidizer: Cl2 (active) <0.03ppm, O3 (ozone) <0.02ppm
Inlet heavy metal ions: Fe, Mn, variable metal ions <0.01ppm
Silicon in water: SiO2＜0.5ppm
Total CO2 of influent water: <3ppm
Inlet water granularity: <1μm