|
Product Details:
Payment & Shipping Terms:
|
| Type: | Customerized | Technical: | Separation And Purification |
|---|---|---|---|
| Material: | SUS304 Stainless Steel,ss316L,FRP | Automatic Grade: | Full Automatic Or Manual |
| RO Membrane: | Dow/Vontron/LANXESS/Hydraunics/GE | Application: | Food,Pharmaceutics,Cosmetics Industry |
| High Light: | industrial reverse osmosis water filter,brackish water ro system |
||
6000 liter salt water desalination machines using reverse osmosis system and self clean system
The basic principles and characteristics of the reverse osmosis method:
1, Principle: A container is divided into two halves by a selective permeation membrane. Pure water and brine are added simultaneously on both sides of the membrane to make the liquid level on both sides of the membrane as high. After a certain period of time, salt water will occur. The liquid level on the side is rising, and the liquid level on the pure water side is decreasing. This is due to the migration of water molecules through the semipermeable membrane to the brine side. This phenomenon is called infiltration.
2, Reverse osmosis membrane: a membrane that is selectively permeable to water or solution
If an appropriate pressure is applied to the concentrated solution, the permeation can be stopped. The pressure when the penetration of the dilute solution into the concentrated solution is stopped is called the osmotic pressure.
3, Reverse osmosis device: reverse osmosis is to add a higher pressure than the natural permeate on the side of the concentrated solution, reverse the natural infiltration direction, and press the ions in the solution to the other side of the semipermeable membrane, which is in normal penetration with nature. The opposite is true
4, Reverse osmosis method: can remove more than 90% of soluble salts and more than 99% of colloidal microorganisms and organic matter from water.
5, The advantages of equipment compared to other water treatment methods:
No phase change, normal temperature operation, simple equipment, high efficiency, less land occupation, convenient operation, less energy consumption, wide adaptability, high degree of automation and good effluent quality.
Safe operation of reverse osmosis desalination system
| Regularly test the SDI index | Excessive SDI can cause irreversible contamination of the membrane module and shorten the life of the module. |
| Control recovery | The recovery rate is too high. On the one hand, the components of the insoluble salt are more than the solubility product and the scale is formed. On the other hand, the flow rate of the concentrated water in the assembly is too low, and it is easy to cause concentration polarization to cause scaling, and is not conducive to the colloid in the water. , suspended matter, etc. are discharged. |
| Pay attention to pressure of the membrane module | The initial pressure difference of the membrane module is very small. If the pressure difference increases rapidly, it indicates that the membrane module is contaminated or fouled, and the cause must be identified and corrected. |
| Pay attention to water production and desalination rate | If the water production and desalination rate change significantly in a short period of time, it is necessary to check whether the pretreatment system is operating normally, such as whether the dosage is appropriate or not, and whether the filter is leaking sand. |
Our service
CHUNKE, a Manufacturing with the professional engineering team, offering integration service, easy and convenient.
Using imported membrane components and Danfoss high-pressure pumps and instruments, the quality guarantee last for 1 year.
The seawater desalination equipment is easy to operate, has obtained "ISO9001 international quality management system" certificate.
Advanced water quality detection and control and excellent system maintenance proposal ensure that the output water quality is stable and the water production meets WHO standards.
High intelligence: our company has accumulated many years of successful experience in engineering, summed up a set of operation management model.
Long service life. Rigorous process design, fine and meticulous equipment selection, to ensure a longer service life and lower maintenance cost.
Detail of device picture
Contact Person: Cara Leong
Tel: +8613246486689
