Home
>
products
>
Reverse Osmosis Water Treatment Equipment
>
|
|
| Place of Origin | Zhengzhou,China |
| Brand Name | HYJB |
| Model Number | 0.25t Single Stage |
0.25T Two Tanks Of Single-Stage Stainless Steel Reverse Osmosis Equipment For Commercial Water Treatment
Product Description:
When the same volume of dilute solution and concentrated liquid are placed on both sides of a container, the middle is blocked by a semi-permeable film, the solvent in the dilute solution will naturally pass through the semi-permeable film, flowing to the concentrated solution side, the liquid level of the concentrated solution side will be higher than the liquid level of the dilute solution to a certain height, forming a pressure difference, to achieve osmotic equilibrium state, such a pressure difference is osmotic pressure. If a pressure greater than the osmotic pressure is applied on the concentrated solution side, the solvent in the concentrated solution will flow to the dilute solution, and the flow direction of the solvent is opposite to the direction of the original penetration, this process is called reverse osmosis.
Parameter Table:
|
Model
|
Water Making Ability
|
Inlet Caliber
|
Effluent Caliber
|
Blowdown alCer
|
Size(mm)
|
Power
|
|
YSRO-0.5T
|
0.5m3/h
|
DN20
|
DN20
|
DN15
|
1500×600×1500
|
1.3kw
|
|
YSRO-1T
|
1m3/h
|
DN25
|
DN25
|
DN20
|
1700×600×1500
|
2.1kw
|
|
YSRO-2T
|
2m3/h
|
DN32
|
DN25
|
DN20
|
2500×1000×1950
|
4.4kw
|
|
YSRO-3T
|
3m3/h
|
DN40
|
DN32
|
DN25
|
2500×1200×2150
|
4.5kw
|
|
YSRO-5T
|
5m3/h
|
DN50
|
DN40
|
DN32
|
2500×1350×2150
|
7.0kw
|
|
YSRO-8T
|
8m3/h
|
DN50
|
DN50
|
DN40
|
3500×1500×2150
|
11kw
|
|
YSRO-10T
|
10m3/h
|
DN50
|
DN50
|
DN40
|
3500×1600×2300
|
15kw
|
Key Advantages:
High degree of automation, automatic shutdown in case of failure, with automatic protection function.
No need for large amounts of chemical treatment, no chemical waste liquid discharge, no environmental pollution.
The water can be continuously operated, the system is simple, the operation is convenient, and the water quality is stable.
Strong purification capacity, high filtration accuracy, for colloid, heavy metals and other stains, can be filtered out, can make the water more clean.
Maintance:
According to the raw water quality and the operation of the reverse osmosis equipment, the operation cycle and time of the automatic water softener can be set according to the needs of the user.
Quartz sand or activated carbon in the sand filter or carbon filter is recommended to be replaced once a year or so.
Fine filter, drain once a week, fine filter PP filter element, it is recommended to replace once a month or so.
If it is not due to temperature and pressure factors, the water production of the reverse osmosis equipment is gradually reduced by 15%, or the water quality gradually decreases beyond the standard, it means that the reverse osmosis membrane needs to be cleaned chemically.
Picture Display:
Contact Us at Any Time
