Automatic Industrial 3 ton of single-stage reverse osmosis equipment

Automatic Industrial 3 ton of single-stage reverse osmosis equipment

Product Description

Reverse osmosis is a kind of membrane separation technology with the help of selective permeability (semi-permeable) membrane work force can be driven by pressure, when the pressure added in the system is greater than the osmotic pressure of the feed solution, water molecules continue to pass through the membrane, through the production of water flow into the center pipe, and then at one end of the outflow impurities in the water, such as ions, organics, bacteria, viruses, etc., are retained in the inlet side of the membrane, and then in the concentrate of the outflow side of the outflow, thus achieving the purpose of separation and purification. Thus, the purpose of separation and purification is achieved.

Parameter Table

Key Advantage

Continuous operation, stable product water quality. No need to use acid and alkali regeneration to save backwash and cleaning water. Generate ultrapure water with high yield (yield can be as high as 95%). Safe and reliable use. Reduce operation and maintenance costs. Simple installation and operation. Time.

Maintenance

1. Perform low-pressure flushing with feed or product water to remove concentrated water and contaminants from equipment operation.

2. Prepare the cleaning solution according to the manufacturer's instructions.

3. Add the cleaning solution to the first section and hold for 60 minutes, at which time you may need to adjust the flow rate to allow for a slow increase in flow to prevent the removal of contaminants from clogging the feedwater channel. Before returning the cleaning solution to the RO cleaning tank should be discharged from the system out of the top of the water and just started 20% of the cleaning solution. When the PH value changes more than 0.5 units, re-adjust to the target value.

4. Optional immersion and recirculation steps are available. The soaking time is from 1 hour to overnight, depending on the manufacturer's recommendations. However, care should be taken to maintain the correct temperature and pH and this will also increase the contact time of the membrane with the cleaning chemicals.

Product Display