Home
>
products
>
Pure Water Equipment
>
|
| Place of Origin | Zhengzhou,China |
| Brand Name | HYJB |
| Model Number | 15T Single Stage |
15 Tons Singles Stage Of High Efficiency Reverse Osmosis Water Treatment System
Product Description:
Reverse osmosis equipment is the raw water through the fine filter, granular activated carbon filter, compressed activated carbon filter, etc., and then pressurized by pump, using the reverse osmosis membrane (RO membrane) with a pore size of 1/10000μm (equivalent to 1/6000 of the size of Escoli, 1/300 of the virus), so that the higher concentration of water into low concentration water, At the same time, industrial pollutants, heavy metals, bacteria, viruses and other impurities mixed into the water are all isolated, so as to meet the physical and chemical indicators and health standards specified for drinking, and produce clean to pure water.
Parameter Table:
|
Model
|
Water Making Ability
|
Inlet Caliber
|
Effluent Caliber
|
Blowdown alCer
|
Size(mm)
|
Power
|
|
YSRO-0.5T
|
0.5m3/h
|
DN20
|
DN20
|
DN15
|
1500×600×1500
|
1.3kw
|
|
YSRO-1T
|
1m3/h
|
DN25
|
DN25
|
DN20
|
1700×600×1500
|
2.1kw
|
|
YSRO-2T
|
2m3/h
|
DN32
|
DN25
|
DN20
|
2500×1000×1950
|
4.4kw
|
|
YSRO-3T
|
3m3/h
|
DN40
|
DN32
|
DN25
|
2500×1200×2150
|
4.5kw
|
|
YSRO-5T
|
5m3/h
|
DN50
|
DN40
|
DN32
|
2500×1350×2150
|
7.0kw
|
|
YSRO-8T
|
8m3/h
|
DN50
|
DN50
|
DN40
|
3500×1500×2150
|
11kw
|
|
YSRO-10T
|
10m3/h
|
DN50
|
DN50
|
DN40
|
3500×1600×2300
|
15kw
|
Key Advantages:
Continuous operation, stable water quality
No need for acid-base regeneration
High yield
Energy saving and environmental protection
Safe and reliable
Maintance:
Strict control of inlet water quality to ensure compliance with equipment standards. The sudden change of raw water quality may cause damage to the equipment. Operating pressure control: under the premise of meeting the water production and water quality, the pressure value is as low as possible to reduce the water flux attenuation and the membrane replacement rate. Before starting after each shutdown, rinse for 10 minutes under the condition of water inlet pressure less than 0.4Mpa.
The operator shall record the operating parameters every hour, including the indicators of intake, production and concentration of water. The device should be placed in a well-ventilated, dry, and dust-free place, away from direct sunlight and high temperature.
Picture Display:
Contact Us at Any Time
