![]() |
Place of Origin | Zhengzhou ,China |
Brand Name | HYJB |
Model Number | 30 ton double -stage |
Water Temp 10-40C Reverse Osmosis System for Complete Bottling Line Water Treatment 30 ton
Equipment Principle
Two-stage reverse osmosis water purification equipment is also known as two-stage reverse osmosis water purification equipment, it is composed of two groups of levels of RO membrane water from the sand tank. Carbon tank, fine filtration filtration directly into the RO host after the separation of pure water and then pressurized by a high-pressure pump to re-enter the RO host, after the second separation to make the water purer to supply the production of water points for direct use of the system. A reverse osmosis water purification equipment work is the raw water pump will be pressurized raw water through the quartz sand filter, activated carbon filter, precision filters, and then pressurized by a high-pressure pump pump through two sets of aperture 1/10,000 μm (equivalent to the size of the Escherichia coli bacteria 1/6,000, the virus of the 1/300) of the reverse osmosis RO membrane, so that a higher concentration of water into a low concentration of water, and at the same time will be pollutants, heavy metals, At the same time, pollutants, heavy metals, bacteria, viruses and other impurities mixed into the water are isolated, the water temperature at 25 ° C or so when the water conductivity can be guaranteed at 0.1 ~ 0.055us / cm or less, and reverse osmosis host of the desalination rate of 99% or more, so as to get to the clean and pure pure water.
Parameter Table
Model
|
Water Making Ability
|
Inlet Caliber
|
Effluent Caliber
|
Blowdown alCer
|
Size(mm)
|
Power
|
YSRO-0.5T
|
0.5m3/h
|
DN20
|
DN20
|
DN15
|
1500×600×1500
|
1.3kw
|
YSRO-1T
|
1m3/h
|
DN25
|
DN25
|
DN20
|
1700×600×1500
|
2.1kw
|
YSRO-2T
|
2m3/h
|
DN32
|
DN25
|
DN20
|
2500×1000×1950
|
4.4kw
|
YSRO-3T
|
3m3/h
|
DN40
|
DN32
|
DN25
|
2500×1200×2150
|
4.5kw
|
YSRO-5T
|
5m3/h
|
DN50
|
DN40
|
DN32
|
2500×1350×2150
|
7.0kw
|
YSRO-8T
|
8m3/h
|
DN50
|
DN50
|
DN40
|
3500×1500×2150
|
11kw
|
YSRO-10T
|
10m3/h
|
DN50
|
DN50
|
DN40
|
3500×1600×2300
|
15kw
|
Advantage
◆Industrial water purification equipment can be divided into full-automatic and semi-automatic, convenient operation and continuous normal operation.
◆Automatic control system is adopted, the whole system design is simple and reasonable, easy to operate with reliable stability.
◆ There are several filtration systems which can effectively retain and remove mud, sand, colloid, particles, scale, rust and metal in the water.
◆Pure water permeability is more than 65%, desalination rate is ≥98% under normal condition.
◆ Small energy coumption, high water utilization rate, lower running cost than other desalination equipment.
◆Adopting international general non-toxic standard filter element, no corrosion, simple operation, easy maintenance, strong adaptability, long service life.
◆The equipment is made with advanced technology, economic rationality, safety and reliability, high efficiency and energy saving, which can reduce the maintenance cost in the later stage.
Product Display
Contact Us at Any Time