Home
>
products
>
Pure Water Equipment
>
|
|
| Place of Origin | Zhengzhou,China |
| Brand Name | HYJB |
| Model Number | 1t Double Stage |
1 Tons Double Stage Of Precise And Fast Reverse Osmosis Equipment
Product Description:
Original water tank -- original water pump -- quartz sand filter -- activated carbon filter -- scale inhibition feeding device -- security filter -- primary high pressure pump -- primary RO reverse osmosis system -- secondary high pressure pump -- secondary RO reverse osmosis system -- pure water tank
Parameter Table:
|
Model
|
Water Making Ability
|
Inlet Caliber
|
Effluent Caliber
|
Blowdown alCer
|
Size(mm)
|
Power
|
|
YSRO-0.5T
|
0.5m3/h
|
DN20
|
DN20
|
DN15
|
1500×600×1500
|
1.3kw
|
|
YSRO-1T
|
1m3/h
|
DN25
|
DN25
|
DN20
|
1700×600×1500
|
2.1kw
|
|
YSRO-2T
|
2m3/h
|
DN32
|
DN25
|
DN20
|
2500×1000×1950
|
4.4kw
|
|
YSRO-3T
|
3m3/h
|
DN40
|
DN32
|
DN25
|
2500×1200×2150
|
4.5kw
|
|
YSRO-5T
|
5m3/h
|
DN50
|
DN40
|
DN32
|
2500×1350×2150
|
7.0kw
|
|
YSRO-8T
|
8m3/h
|
DN50
|
DN50
|
DN40
|
3500×1500×2150
|
11kw
|
|
YSRO-10T
|
10m3/h
|
DN50
|
DN50
|
DN40
|
3500×1600×2300
|
15kw
|
Key Advantages:
Reverse osmosis is a physical desalination method that has different advantages in many aspects.
The salt-containing feedwater was desalted and purified by physical method without phase change at room temperature. At present, the single reverse osmosis membrane element is up to more than 98%, and can remove colloid, organic matter, bacteria, viruses and so on.
Maintenance:
If the pressure difference between the inlet and outlet of the security filter increases (>0.06Mpa), the filter element must be replaced to ensure the normal operation of the RO device. Filter replacement cycle depends on its inlet water quality, generally every 15-20 days to replace once, the longest replacement cycle should not exceed 30 days. After the replacement of the filter element, the security filter must be ventilated
Various operating parameters of RO device are recorded periodically.
If the equipment runs for a long time, the RO membrane component will cause fouling, so it is necessary to regularly clean the RO membrane component chemically.
Picture:
Contact Us at Any Time
