Home
>
products
>
Pure Water Equipment
>
|
| Place of Origin | Zhengzhou,China |
| Brand Name | HYJB |
| Model Number | 12T Single Stage |
12T Single-Stage High-End And Time-Saving Revise Osmosis Equipment
Working principle:
A film that is selective to the substance through is called a semi-permeable film, and generally a film that can only pass through the solvent but not the solute is called an ideal semi-permeable film. When the same volume of dilute solution (such as fresh water) and concentrated solution (such as salt water) are placed on both sides of the semi-permeable film, the solvent in the dilute solution will naturally flow through the semi-permeable film and spontaneously to the concentrated solution side, this phenomenon is called osmosis. When osmosis reaches equilibrium, the liquid level on the concentrated solution side will be a certain height higher than that of the dilute solution, that is, a pressure difference is formed, and this pressure difference is the osmotic pressure. The size of the osmotic pressure depends on the inherent properties of the solution, that is, it is related to the type, concentration and temperature of the concentrated solution and has nothing to do with the properties of the semi-permeable film.
Parameter Table:
|
Model
|
Water Making Ability
|
Inlet Caliber
|
Effluent Caliber
|
Blowdown alCer
|
Size(mm)
|
Power
|
|
YSRO-0.5T
|
0.5m3/h
|
DN20
|
DN20
|
DN15
|
1500×600×1500
|
1.3kw
|
|
YSRO-1T
|
1m3/h
|
DN25
|
DN25
|
DN20
|
1700×600×1500
|
2.1kw
|
|
YSRO-2T
|
2m3/h
|
DN32
|
DN25
|
DN20
|
2500×1000×1950
|
4.4kw
|
|
YSRO-3T
|
3m3/h
|
DN40
|
DN32
|
DN25
|
2500×1200×2150
|
4.5kw
|
|
YSRO-5T
|
5m3/h
|
DN50
|
DN40
|
DN32
|
2500×1350×2150
|
7.0kw
|
|
YSRO-8T
|
8m3/h
|
DN50
|
DN50
|
DN40
|
3500×1500×2150
|
11kw
|
|
YSRO-10T
|
10m3/h
|
DN50
|
DN50
|
DN40
|
3500×1600×2300
|
15kw
|
Key Advantages:
It is very convenient to install and use, and only needs to connect the machine with the water pipe.
Fresh water can be extracted from seawater or brackish water to recover the valuable components dissolved in the solution.
There is no need to use a large number of chemical agents and acid and alkali regeneration treatment, so there is no chemical liquid discharge and no environmental pollution.
It has the advantages of wide application range, high degree of initiative, less land area, low energy consumption and good effluent quality.
Maintance:
Check the operation of each pump regularly and replace lubricating oil in time.
Check the electrical control system regularly to ensure the normal operation of the equipment.
Regular replacement of quartz sand and activated carbon filter material, sand carbon is recommended to be replaced every 8-12 months, the specific replacement cycle according to the raw water quality and equipment operating conditions.
Picture:
Contact Us at Any Time
