2000LPH Industrial Water Ultrafiltration System Reliable Operation 380V 1.5Kw

380V / 1.5Kw 2000LPTH Ultrafiltration Water Treatment Machine

Production Description

Working principle: The principle of ultrafiltration water treatment equipment is to use the micropore size of ultrafiltration membrane for filtration.The micropore size of ultrafiltration membrane is generally between 0.01 and 0.1 microns, which can filter out tiny particles in water, but can not filter out water molecules.When water passes through the ultrafiltration membrane, the tiny particles in the water will be filtered out, while the water molecules can pass through the ultrafiltration membrane, thus realizing the purification of water.

Key advantages

Energy saving and environmental protection: Compared with traditional water treatment methods, ultrafiltration equipment has lower energy consumption and lower operating costs.In addition, because it does not need to add chemical agents, it also reduces the consumption and emission of chemical agents, and is more environmentally friendly.
Easy operation and maintenance: The ultrafiltration equipment usually has an automatic control system, which is simple and convenient to operate.At the same time, the equipment is compact in structure, small in occupied area, and easy to install and maintain.The replacement of filter element is relatively simple, which reduces the maintenance workload.

Maintance

Power-on operation
Valve adjustment: before startup, check the operating position of each valve of the system, adjust the inlet valve of the ultrafiltration device to 1/3-1/2 open state, and fully open the outlet valve.
Start the ultrafiltration pump: close the outlet valve of the ultrafiltration pump, start the pump, and then slowly adjust the outlet valve of the pump to fully open or open 2/3, and empty the air in the bag filter.
Pressure regulation: when the pressure gauge at the inlet of the ultrafiltration device shows, empty the air in the ultrafiltration device, adjust the inlet valve to make the pressure not more than 0.45 MPa, and adjust the outlet valve to make the pressure difference between the inlet and outlet within the normal range (the maximum outlet pressure of the tubular ultrafiltration device is not higher than 0.08 MPa;The maximum pressure difference between the inlet and outlet of the spiral ultrafiltration device shall be < 0.2 MPa, generally maintained at 0.1 ± 0.05 MPa).

Product Display