0.5T Unipolar Reverse Osmosis Water Treatment System For Industrial

0.5T Unipolar Reverse Osmosis Water Treatment System For Industrial Use

Product Description

This product is a 0.5 ton single pole reverse osmosis water treatment equipment, using advanced reverse osmosis technology, designed specifically for small and medium-sized water treatment needs. This equipment can effectively remove impurities such as dissolved salts, organic matter, microorganisms, bacteria, etc. from water, providing high-purity and high-quality water.

Parameter Table

Key Advantage

1. High processing efficiency
Single stage reverse osmosis design, fully utilizing water pressure potential energy to improve water treatment efficiency. The equipment produces a large amount of water per unit time, meeting the demand for rapid water use.
2. High effluent quality
By using high-precision reverse osmosis membrane filtration, soluble salts, organic matter, heavy metal ions, etc. in water are effectively removed, ensuring that the effluent quality meets high standard requirements.
3. Low operating costs
The equipment adopts energy-saving design to reduce energy consumption and operating costs. At the same time, the reverse osmosis membrane has a long lifespan, a long replacement cycle, and reduces maintenance costs.

Maintenance

1. Cleaning: Regularly perform chemical cleaning on the reverse osmosis membrane based on the inlet water quality and operating conditions. Generally, it should be cleaned every 3-6 months. If the incoming water quality is poor or the membrane components are severely contaminated, the cleaning cycle should be shortened. Choose appropriate cleaning agents, such as acidic cleaning agents for removing carbonate scale, metal oxides, etc., and alkaline cleaning agents for removing organic matter, microorganisms, and other pollutants. The cleaning process is strictly carried out in accordance with the operating procedures to avoid damaging the membrane components due to improper operation.
2. Storage: When the equipment is shut down for a long time (more than 7 days), the reverse osmosis membrane needs to be protected. Fill the membrane element with chemical agents to prevent microbial growth and dehydration of the membrane element. The commonly used protective solution is a 1% sodium bisulfite solution. During storage, regularly check the concentration and pH value of the protective solution to ensure its effectiveness. Before restarting the device, rinse the protective solution thoroughly with clean water.
3. Replacement: Reverse osmosis membranes have a certain service life, usually 3-5 years. When the desalination rate of the membrane element drops to 85% -90% of the initial value, or the water production rate drops to 70% -80% of the initial value, and cannot be restored through chemical cleaning, the membrane element needs to be replaced in a timely manner to ensure the quality of the water production and the normal operation of the equipment.
 

Product Display