2T / H Water Filtration Machine For Well Water Sand Carbon Filter Industry Purifier
Production Description
The main working principle of water softening equipment is to use anion and cation softening. Let the raw water through the anion converter, remove the water, calcium, magnesium, sodium ions. Out of the water is just water molecules. No other molecules, then can effectively prevent scale.
In the case of incoming water for deep well water or water source hardness is very large, the use of water softening equipment is to remove the calcium and magnesium ion content in the water, so that the water calcium and magnesium ions to reduce. If there is no water softener or water softener failure, calcium and magnesium salts on the surface of the reverse osmosis membrane due to the sharp increase in concentration and the formation of precipitates insoluble in water, clogging the reverse osmosis membrane holes, shortening the service life of the reverse osmosis membrane, and increasing the maintenance cost of the equipment.
Functional advantage:
Anti-corrosion and anti-pollution: The bed of the softening filtration equipment usually adopts anti-corrosion materials such as glass fiber reinforced plastic (FRP), and the pipeline adopts ABS engineering materials, which are highly corrosion-resistant and can effectively solve the corrosion problem of the equipment. In addition, the reasonable structure and compact design also reduces the accumulation of pollutants and ensures the water quality.
Reasonable structure, easy to install: the overall design of the softening filtration equipment is reasonable, covers a small area, and the lightweight structure makes the equipment easy to install. At the same time, the installation and commissioning process of the equipment is very simple and can be flexibly arranged according to the site conditions.
Reliable performance and stable operation: the softening filtration equipment has been proved by long time practical application, its operation performance is stable and reliable, its action is sensitive and reliable, and no abnormal situation has ever occurred. Coupled with perfect after-sales service and technical support, the equipment is always kept in good running condition.
Maintennace
Filter cartridge is the main part of filtering impurities and pollutants in water, which needs to be cleaned and replaced regularly.Cleaning cartridge cycle is usually 3-6 months, replace the cartridge cycle for 1-2 years.
Regularly check the valves and pipelines of the water softening equipment to ensure its normal operation and no leakage.
Pay special attention to the connection of the pipeline to ensure that there is no leakage or rupture of the pipeline.
Water softening equipment needs to be connected to the power supply to operate normally, so you need to regularly check the power cord and plug to ensure that the power cord is not broken or aging.
Regularly check the control parameters of the water softening equipment, such as the ratio of brine, salt recovery rate, etc., and adjust them according to the actual situation.
When the salt tank is not used for a long time, clean the remaining salt liquid in the department, and add lubricating oil in the rotary valve and transmission parts to prevent the equipment from rusting.
When the water softening equipment is working, the relay time cannot be adjusted, and the equipment can be repaired or scrubbed only after power failure.
Try to avoid collision between the exchange columns, and after the equipment is in place, fix the motor bolts, switch bolts, wiring bolts, etc. once more to avoid accidents when the equipment is running.
Product Display
Contact Us at Any Time