4 Tons Long Lasting Reverse Osmosis Equipment for Drinking Water Softening

4 Tons RO Drinking Softener Filter System Price Industrial Water Treatment Equipment

Product Description

In order to adapt to the needs of domestic drinking water and industrial water, the development and utilization of iron (manganese) groundwater resources, the product process is simple, iron and manganese removal does not require the addition of any chemicals, with stable and reliable operation, strong applicability to the water quality, high treatment efficiency, significant economic benefits and other characteristics, it is the ideal equipment for removing iron and manganese.

Parameter Table

Water Purification Principle

Iron and manganese in groundwater generally exist in bivalent state, the main principle of water purification of this equipment is that:

The iron (manganese) containing groundwater by aeration, iron (manganese) in the water began to oxidize, when the water flow through the manganese sand or special quartz sand filter layer filtration, due to the chemical action of the filter media and the surface of the filter media of the iron (manganese) bacteria (multibacillary hydrangea, iron-containing ferrobacterium Kahlrabi, unicellular ferric bacteria and rust-colored lanceolate bacteria and so on) the biological chemical effect,

The filter media layer began to occur in the biological chemical reaction, contact oxidation reaction and physical retention and adsorption and other effects, these processes together can greatly accelerate the oxidation, curing and removal of iron (manganese) in the groundwater.

Biochemical reaction, contact oxidation reaction and physical retention and adsorption start to occur in the filter media layer, and these processes together can greatly accelerate the oxidation, solidification and removal of iron (manganese) in the water, so as to achieve the desired effect.

Installation points

1.In the filter media should be carefully screened according to the requirements before loading, after screening from bottom to top, from large to small layer by layer loading.

2.The backwash strength is generally about 15L/S.m2 and the backwash duration is generally 5~7min.

3.The initial operation stage of the equipment, backwashing water volume should not be too large, the intensity should not be too high, only to loosen the filter media, so as not to affect the formation of biologically active filter membrane.

Products Display